數顯電熱恒溫水浴鍋是一種實驗室用電器,根據水浴的原理,通過電能轉換為熱能,將水加熱到恒定的溫度,用于控制反應的溫度、加熱樣品、浸泡方法等實驗操作。
組成部分主要包括加熱器、溫度傳感器、控制系統和容器。加熱器是將電能轉換為熱能的核心部件,將電流通過電阻絲加熱,使水的溫度升高。溫度傳感器用于感知水的溫度,通常是一種PT100或熱敏電阻,將溫度轉換為電信號輸入到控制系統??刂葡到y根據設定的溫度和實時感知到的水溫,調整加熱功率,使水溫始終保持在設定值附近。容器則是用于裝載水和樣品的部件,通常是不銹鋼或玻璃材料。
數顯電熱恒溫水浴鍋的優點是溫度精度高、穩定性好、使用方便、可靠性高且安全性好。它可以通過數碼顯示器顯示實時溫度,操作簡便,可以通過按鈕或旋鈕調節目標溫度,并具有超溫保護、漏電保護等安全措施,即便長時間使用也不會(huì )對樣品產生損害。應用范圍非常廣泛,包括化學實驗、醫藥制劑、生命科學、食品檢測、環境監測等領域。在化學實驗中,它通常用于酶反應、DNA分離、高壓液相色譜等實驗;在醫藥制劑中,它則用于藥品合成、分離、純化、干燥等工藝;在生命科學中,它則用于細胞培養、蛋白質分析、生物學實驗等研究;在食品檢測和環境監測中,它也可以被用來對樣品進行加熱或浸泡等實驗步驟。
數顯電熱恒溫水浴鍋操作使用:
1.將恒溫水浴鍋放置平穩處,并檢查外殼、控制器、溫控儀等是否正常。
2.按下電源開關,使恒溫水浴鍋開始預熱。預熱時間根據鍋的規格和所需溫度而定,通常需要5-10分鐘。
3.在預熱過程中,設置所需要達到的溫度和保持時間。具體操作方法是按下溫度調節鍵和時間調節鍵,然后調節所需要的值。
4.當恒溫水浴鍋達到設定溫度后,會(huì )自動進入保持狀態,并保持所設定的時間。
5.在保持期間,不要將液體加入或移動容器。如果需要更改溫度或時間,則需要先停止保持狀態,進行調整,然后重新進入保持狀態。
6.操作結束后,按下電源開關來關閉恒溫水浴鍋,等待其冷卻后,清理內部溶液和容器。在清潔過程中,必須注意安全操作,避免觸摸加熱區域。
7.如果長時間未使用恒溫水浴鍋,則務必定期檢查,以確保其正常運行。在使用前應檢查電源線和插頭是否磨損,若發現彎曲、脫落及劣化痕跡應立即更換。