精密電熱恒溫培養箱通過加熱管對箱體內進行加熱,適合于普通的細菌培養和封閉式細胞培養,并常用于有關細胞培養的器材和試劑的預溫。主要由箱體、加熱器、鼓風機和溫控儀等幾部分組成。 電熱恒溫培養箱的工作原理電熱恒溫培養箱通過控制電加熱管的通電時長,讓溫度恒定在某一個數值,當溫度低于這個設定溫度值時,電熱管開始加熱;當溫度高于這個設定溫度值,電加熱管停止加熱。為確保電熱恒溫培養箱內部溫度均勻,根據箱體大小不同,會(huì )在電加熱管附近安裝功率不等的離芯風機,使電加熱管溫度均勻快速分布到箱體內部。通過箱體內部氣流循環,達到溫度恒定。
精密電熱恒溫培養箱操作方法:
1、接通電源,按下電源開關,此時電源指示燈亮。
2、操作人員需仔細閱讀使用說明,了解、熟悉培養箱功能后,才能接通電源。
3、當培養箱顯示溫度達到設定溫度時,加熱中斷、加熱指示燈熄滅,在標準環境溫度下通電90分鐘后,溫度可保持穩定,如箱內即時溫度超過設定上限報警溫度控溫儀溫度跟蹤報警指示燈亮,同時自動切斷加熱器電源。
4、把溫度控制儀調到用戶所需的設定溫度值。
5、如打開玻璃門取樣品時,加熱器、循環風機會(huì )停止工作,當關上玻璃門后,加熱器和風機才能正常運轉,這樣可避免培養物的污染及溫度的過沖現象。
精密電熱恒溫培養箱使用時不宜在高壓、大電流、強磁場條件下使用,以免干擾溫控儀及發生觸電危險;電鍍零件和表面飾漆,應經常保持清潔,如長期不用,應在電鍍件上涂中性油脂或凡士林,以防腐蝕,培養箱外面套好塑料薄膜防塵罩將培養箱放在干燥室內,以免控溫儀受潮損壞。